Hoselect Lithium Ion Battery Module – Wallmount – 48V – 4.8kwh New / 1st life – LiFePO4 cells Low environmental impact Superior thermal stability High peak power rating Long cycle life Intelligent Battery Management System (BMS) BMS communication compatible with: Sacolar Inverters Growatt Inverters Sunsynk Inverters Deye Inverters Victron Inverters SMA Inverters Solis Inverters Goodwe Inverters RS485 BMS communication CAN bus Parallelable up to…
Availability: In Stock
Hoselect Lithium Ion Battery Module – Wallmount – 48V – 4.8kwh
| Combination method | 15S |
| Rated capacity | Typical: 105 Ah Minimum: 100 Ah |
| Mean operation voltage | 48.0-49.5 V |
| Voltage at end of discharge | 47 V |
| Charging voltage | 51.6 V |
| Internal impedance (measured at AC 1kHz after 50% charge) | <30 mΩ |
| Standard continuous charge current | 20A – 40A |
| Maximum continuous charge current | 100A (controlled by BMS if comm. used) |
| Maximum continuous discharge current | 100A |
| Operation temperature (at 60±25% R.H) | Charge: 0~45 °C Discharge: -20~55 °C |
| Storage temperature (at 60±25% R.H) | less than 12 months: -10~35°C less than 3 months: -10~45°C less than 7 days: -20~65°C |
| Dimensions | 442 x 480 x 221.5 mm |
| Weight | 42kg (prismatic cells) |
| Volumetric specific energy | 104Wh/L |
| Gravimetric specific energy | 87 Wh/kg |
Cycle life: Battery tested for the following:
| Depth of discharge | Cycles @ 25°C and 1C (100A) |
| 80% | 3500 |
| 85% | 2500 |
| 90% | 1250 |
| 95% | 500 |
Communication: The BMS has three RS485 ports one RS232 port. Two RS485 ports are used for the parallel connection of multiple batteries. The RS485 and CAN ports are used for inverter-battery communication. The RS232 port allows for real-time monitoring of the following:
Reviews
There are no reviews yet.